JellyBAM ROM for Galaxy S2! [GT-i9100/SGH-i777]

Download this video for viewing in HD on your smartphone or computer.
Click Here to Download High-Quality HD video to your Smartphone or Computer.

This video was brought to you by AndroidRoot.org. Click Here to See at AndroidRoot.org

For this week’s AOSP ROM of the week on the Galaxy S2 GT-i9100 and AT&T SGH-i777, check out the latest version of JellyBAM ROM.

Based on Android 4.2.2 sources, JellyBAM ROM combines the powers of three AOSP custom ROMs, AOKP, CM10.1, and ParanoidAndroid ROMs.

Inside JellyBAM ROM, you will find many goodies including full AOKP ROM control, ParanoidAndroid hybrid settings, and stability of CyanogenMod ROM.

I think this is one of the most fun ROMs to play with (as it combines features from 3 different ROMs), and the latest version I tested intensively is very stable, works nearly flawless out of the box with great battery life and awesome performance.

If you are looking to run the latest Android 4.2.2 with all the customization you can imagine, try JellyBAM ROM for this week(end) and let me know what you think!

Download:

Download JellyBAM ROM for Galaxy S2 GT-i9100

Download JellyBAM ROM for Galaxy S2 SGH-i777 (AT&T)

No Gapps needed

Credits – JellyBAM <--- Please donate to the developers of this ROM if you like it, thx!

You may also like...

46 Responses

  1. Aiyer says:

    Does the Camcorder work on the SGH-I777? Other 4.2.2 ROMs have this issue.

  2. JW says:

    Does the wifi tethering work?

  3. Nikhil says:

    Hey Max,

    Just One complaint.. i am from india.. wen we are downloading from any link which you provide we are not getting enough speed while downloading ROMs.

  4. Sam says:

    After installation complete, I rebooted in recovery and rebooted immediately. But stuck up in Jelly Bam Logo. Need help

    • Sam says:

      Does anybody think that this is because Kernal & ROM mismatch? Or it does not matter?

    • mike says:

      i had the same problem when phone booted after flashing this rom. i rebooted into clockwork and proceeded to factory wipe, wipe delvik cache, and clear cache, then reebooted and everything worked out for me after i did that.

  5. Kta says:

    Hello. I couldn’t find this ROM on XDA forum. Where can I find it? Thank you

  6. George says:

    Downloaded and did a complete data wipe, but when I started the install it says “assert failed: getprop yada yada, the says E:Error in /emmc/*folder*/*filename*” Any suggestions?

  7. Anthony says:

    I’m coming from AOKP MR1 Build 5. Do I need to factory reset/wipe cache?

  8. adrianjp16 says:

    Greetings, I would like to know which kernel which uses this rom and “governors” are used for test

    • George says:

      I even tried just wiping the cache instead of the factory reset and got the exact same thing. I’m coming from Shostock 3 with the Jeboo Kernel on an AT&T device. Would really like to know what I’m doing wrong.

  9. John says:

    Cant get it to work coming from shostock2 ICS.
    Thought the download might be corrupt so i downloaded it again. Still wont run.
    When it starts up I get a window saying sorry setup has stopped working.

    • deyvis says:

      tienes que limpiar tu kernel
      descargate una el limpiador de kernel el cual lo parpadeas desde el recovery luego instalas el ultimo jeboo kernel que salio. luego procede a instalar esta rom

  10. julio says:

    what kernel uses this rom?

    • sudipto says:

      it uses d latest cm kernel…u cn even flash dorimanx kernel if u want….wic allows u to do overclockin etc wd stability

  11. julio says:

    know of any tutorials on how clean the kernel? that is compatible with the i777 S2?

  12. George says:

    I did try flashing jellybam over shostock with siyah. The install went all the way through, but froze at the boot animation…both times I tried.

  13. Ravi says:

    Everything is working fine. Only problem i have is battery. It eats up battery so fast even if it is in sleeping mod. Please help how can i improve.
    Thanks

  14. John says:

    HOW TO INSTALL
    Installation steps are the same as other custom ROMs

    Requirements:

    Rooted device
    JellyBam supported device
    Installation steps:

    Download JellyBam for your device
    Place the downloaded zip in your internal SDCard
    Reboot the phone into recovery
    If it’s the first time you install JellyBam: Select wipe data / factory reset, Go into advanced tab and select wipe dalvik cache, Go into mount and storage tab and select format /system
    If you are updating your existing JellyBam build, skip the previous step
    Select install zip from sdcard and select the downloaded JellyBam build zip
    Flash it and reboot your device
    It will take from 2 to 10 minutes to run (only the first time) so, be patient!
    Enjoy JellyBam

    • George says:

      Did it exactly as described and the install failed. Assert failed again, didn’t even get through the install…I’m close to giving up on this rom. Never had this many problems…

  15. sudipto says:

    u r gettin d error coz ur previous kernel(like philz kernel) doesnt support d installation of dis rom….u cn do 2 thngs
    1.flash a different kernel 4 ur present rom
    2.flash a different rom mayb resurectn remix 3.1.3 n dn flash jellybam rom
    im usin jellybam v7 rom works gr8…it comes wd cm kernel but i flashed latest dorimanx 9.10 kernel so dat i get STweaks n overclocking
    i had d same prob be4 when i ws usin lion rom n was nt able 2 flash other roms dude error wic sed “status7″….jellybam is a v stable rom try it..

  16. adrianjp16 says:

    me gusta esta rom pero el unico problema es que cuando deslizo el dedo por la barra de estado se sube y baja la intensidad del brillo y en las opciones de pantalla no tengo eso activado, por lo demas esta bien pero me canse de estar subiendo y bajando brillo a cada rato.

  17. adrianjp16 says:

    I like this rom but the only problem is that when you slide your finger across the status bar is raised and lowered the brightness and display options that I have not turned on, otherwise it’s fine but I get tired of being up and brightness down all the time.
    Reply

  18. skot says:

    I really like this rom combo! Not as fast-responding as SuperNexus, but more customizable. The ‘color scenario’ settings are very important to me. Many new phone models have washed-out colors. I like mine to be vivid, so that iphone owners drool as they get a glimpse of the android eating the apple on my wallpaper.

  19. the violet says:

    hi..i install this rom
    i have f/c in phone app
    what can i do??

  20. mp3xp says:

    will not let me access the sd

  21. Pallav says:

    Guys i want to know that how can we transfer big games to external SD card…….plzzzz help

  22. deyvis says:

    please please someone tell me if they put these custom roms I lose the quality of the camera???

  23. DazeJar says:

    uuhhmmm…… hi there…… ”unfortunately, Setup Wizard has stopped” ????

    • DazeJar says:

      sorry my mistake its working πŸ™‚

      follow the above instructions correctly

      but I suggest you to install a better file manager πŸ˜‰
      ——————————————————————————————————————-
      HOW TO INSTALL
      Installation steps are the same as other custom ROMs

      Requirements:

      Rooted device
      JellyBam supported device
      Installation steps:

      Download JellyBam for your device
      Place the downloaded zip in your internal SDCard
      Reboot the phone into recovery
      If it’s the first time you install JellyBam: Select wipe data / factory reset, Go into advanced tab and select wipe dalvik cache, Go into mount and storage tab and select format /system

      ——————————————————————————————————————————–

      gt-i9100
      cm kernel 3.0.31
      baseband I9100xxkg3

      good luck everyone and thanks for the helps and instructions of this site πŸ˜‰

  24. anshul says:

    I am not able to install jellybam 7.4 0n my sgh i777. I am gettig the following error.

    I have followed the instruction. also tried with a different kernel.I am on shostock v3 with jebo kernel. alternately i have also tried to install this rom after i installed akj kernel. but each time i get the same error.

    — Installing: /sdcard/jellybam-v7.4.0_d2att-STABLE.zip
    Finding update package…
    Opening update package…
    Installing update…
    assert failed: getprop(“ro.product.device”) == ”
    d2att” || getprop(“ro.build.product”) == “d2att”
    E:Error in /sdcard/jellybam-v7.4.0_d2att-STABLE.zip
    (Status 7)
    Installation aborted.

  25. harshdeep says:

    wifi direct not working on this rom.can u please tell me roms where wifi direct works???

  26. Ne0 says:

    Hi all,

    I wanted to try this ROM so badly.. I flashed this rom and I was getting an error google.process has stopped and it just didnt load …. I had to recover my device .. Can any1 help me please with this issue … what could be wrong??? Do you think its the kernel .. I have the CWM kernel …..

    • Ne0 says:

      The googleapps.processs has stopped is the error i get and setup wizard has stopped ….. Not sure what the issue is … Please help me out guys ….

      • Navethan says:

        im not sure what the actuall problem is, but you can always flash the official JB rom if you want to recover

  27. Ali says:

    hi

    i downloaded but i can understand how can install it ?
    plz show me .
    tnx

  28. damonk says:

    Does anyone know when this will be available for the SPH-D710?

  29. damonk says:

    Does anyone know of a way/link to install multi window on the SPH-D710?

Leave a Reply

Your email address will not be published. Required fields are marked *